Murphy Bed With Storage – A common problem in the home is the lack of space and, usually, there are two reasons that cause it. One is because the house is small and you do not have physically square meters to accommodate more people and place equipment. Decide which wall you want to build a Murphy bed yourself. Make sure there are no power cables or a gas line there are.
Take the size of the mattress you will use. Measure the length and thickness and write these measurements on a sheet of paper. Measure the length and depth of the mattress in veneered plywood. Cut murphy bed with storage using a table saw use. Peel off the cut edges. Nail the pieces of sheet metal plywood to form a box. Add wood glue to the adjoining corners, then nail two “L” clips at the edges, one at the bottom and one at the top.
Place the cut pieces of sheet metal plywood on the top of the box and place them well. Cut it if necessary. Turn the box and place the mattress and find it comfortable. Make a second box using the dimensions of the first one. This box must be 3 cm longer. It will serve as a storage space built into the wall. Remove the mattress and move the murphy bed with storage box to the desired wall. Lift the box to the wall. Use a pencil to draw the design of the box on the wall.
This post topic: Storage bed