Ladder bookshelf target – If you have an old two-sided stepladder lie about, a new way to recycle it and give it new life is to turn it into a ladder bookcase. These types of shelves give a really rustic vibe to the interior, in addition to being robust parts of furniture. If you want to keep the rustic theme goes, the source of recycled wood for shelves and create a real piece of recycled furniture.
How to build ladder bookshelf target, extend the legs of the ladder until they are in an A shape with the legs of the angle you want for the bookshelf. Measure the top of the steps where the legs are joined by a hinge, then cut a piece of plywood on these measurements. Place plywood on top of the ladder and use one inch wood screws and a drill to secure the plywood to the top. The screws go into the top of the legs and hold stage legs open at the desired angle. Later, the shelves will be screwed into the rungs to further secure steps legs open.
After that to build ladder bookshelf target, measure the distance between the lower cross bars on each side of the steps, as well as the lengths of the rungs. This will give you the dimension of the bottom shelf. Repeat up the rungs to get all rack dimensions; they will get smaller as they get closer to the top. Cut the shelves, either from recycled timber or plywood. Place the bottom shelf between the bottom two rungs and fasten with wood screws. Repeat with remaining shelves and their corresponding rungs. Painting steps bookshelf if desired, or to run true to the rustic vibe, leaving the unpainted.