Kitchen cabinet handles – It refinishes furniture Kitchen itself is a cost effective way to update your kitchen without spending money on a private contractor. Cabinet doors that are worn or have dents can be sanded and painted but still show imperfections. Therefore, turning doors around using the inside outside, hidden bumps and show a fresh surface. Before painting and sanding, however, the holes in the handles and knobs must be filled.
Fix holes kitchen cabinet handles door after investing Doors, Remove the cabinet doors from their frames and place them on a canvas. Remove the door hardware with a drill or screwdriver and set them aside. Use an orbital sander equipped with sandpaper 120 grit to smooth the surface of the doors. Pay special attention to areas where nails and screws were removed because the wood will be slightly raised or even splintered and will have to be softened.
Fix holes kitchen cabinet handles door after investing Doors, Collect sawdust from the sanded cabinets. Mix a small amount of wood glue in a bowl with sawdust. Continue adding sawdust until the wood glue to form a thick paste. Apply the paste to the holes in the doors with a spatula. Press the dough into the holes to fill completely. Angle putty knife to scrape excess glue around the hole slightly. Let the paste dry for several hours until it is hard to the touch. Use sandpaper 120 grit to smooth the dough until it is flush with the surface of the Door. Wipe clean with a damp cloth doors and paint or first as usual.
This post topic: Hardware